Downsizing Your Method with Larger Energy Chains
HK style roller chains conform to H form of ANSI, and their thickness of inner and outer website link plates are equal to people of your next bigger size chain. Hence, HK style roller chains are higher in tensile power by about 20%and in maximum allowable load by about 15% than individuals of standard roller chains. 
Because the fat from the chains can also be larger, HK form roller chains are appropriate to the application of hefty duty at lower pace.
Suggested utilizes
?Optimal for areas exactly where larger power is needed but massive and heavier chains cannot be utilised.
Selection of chains
Decide on a right HK variety roller chain dependant on “Low-speed selection”
For that highest allowable load, see the next table of dimensions.
HK type roller chains can be found as much as triplex.
Sprockets
Use normal sprockets for a simplex HK roller chain Because the transverse pitches are larger than these of common chains within the situation of duplex or triplex, normal sprockets can not be made use of. Refer on the sprocket tooth profiles for HK
Connecting website link and offset hyperlink
The tensile power of connecting back links and offset hyperlinks are listed to the left, but the optimum allowable load is lower than that in the base chain. Please seek advice from us really should you’ve any concerns. It really is advisable to utilize the connecting link of interference-fitted (FJ, HJ)
In no way make the holes with the connecting plate larger and in no way make the pins thinner to facilitate the perform for fitting the pins into the connecting plate, due to the fact otherwise the fatigue power are going to be lowered.
Variety of chains
Select a right HK variety roller chain based upon “Low-speed selection”
For your highest allowable load, see the next table of dimensions.
HK style roller chains can be found as much as triplex.
Sprockets
Use conventional sprockets for a simplex HK roller chain Because the transverse pitches are bigger than those of typical chains during the case of duplex or triplex, typical sprockets are unable to be used. Refer towards the sprocket tooth profiles for HK
Connecting website link and offset link
The tensile power of connecting backlinks and offset links are listed within the left, but the greatest allowable load is reduced than that of your base chain. Please check with us really should you’ve any inquiries. It is actually proposed to make use of the connecting link of interference-fitted (FJ, HJ)
Never ever make the holes of the connecting plate bigger and in no way make the pins thinner to facilitate the function for fitting the pins in to the connecting plate, due to the fact otherwise the fatigue strength is going to be lowered.
