Any damage over the teeth surfaces of a sprocket diminishes the lifestyle of the conveyor chain.
With conventional sprockets, substantially worn sprocket teeth had been repaired by teeth padding or the whole sprocket was replaced. In both situation, restore was expensive and with teeth padding, accuracy was impaired. We designed new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our customers for that dramatic cost savings in cost and time.
Structure
The teeth might be replaced by two methods: person tooth substitute or sectional teeth substitute.
The bolts and nuts applied for mounting the teeth on to your sprocket are spot-welded to prevent loosening.
The respective structures are illustrated about the appropriate.
The over photograph plus the best suitable illustration show a sprocket for person tooth substitute. Because the joint face between the replaced teeth and also the sprocket is formed inside a distinctive arc, the bonding accuracy is higher and the sprocket power is enhanced. Furthermore, because the load acting over the mounting bolts is decreased, there may be less possibility of loosening. This sprocket 
construction is patented.
There are two sorts of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are made use of for substantial sprockets getting heavy loads and welded sheet steel hubs for other applications.
