Why Coupling Grease?
Sufficient lubrication is essential for satisfactory gear coupling operation. Gear Coupling Grease is particularly made for gear coupling applications to increase coupling life though dramatically lowering upkeep time. Its substantial viscosity base oil and tackifier combine to maintain the grease in location and reduce separation and it’s in full compliance with NSI/AGMA 9001-B97 lubrication recommendations.
Coupling Grease is dark brown in color and manufactured using a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to higher centrifugal forces commonly identified in couplings. Bearing or basic function greases are likely to separate and reduce effectiveness because of higher centrifugal forces to the several substances at higher rotational speeds. These high centrifugal forces encountered in couplings separate the base oil from your thickeners. Hefty thickeners, which have no lubrication characteristics, accumulate while in the gear tooth mesh place resulting in premature coupling failure. Gear Coupling Grease is built to hugely resistant to centrifugal separation in the oil and thickener, which permits the lubricant to become utilised for a relatively lengthy time period of time.
One of many secrets towards the good results of Gear Coupling Grease would be the variable consistency throughout the doing work cycle in the application. The consistency of our gear coupling grease improvements with all the working situations. Doing work on the lubricant below real support problems triggers the grease to turn out to be semi-fluid, functionally solash lubricating the wear surfaces on the coupling. Since the grease cools, it returns towards the authentic consistency, thereby stopping leakage.
Gear Coupling Grease is available from stock in 14 oz. cartridges, 1 lb. and five lb. cans.
Minimizing of coupling put on
Resistance to water washing
Corrosion and rust protection
Large load carrying abilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in spot under high speeds
Resistance to centrifugal separation
Reduction in down time & maintenance cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated having a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.
Why Coupling Grease?